Τηλ. Kέντρο: 22210-25747 FAX: 22210-25747

info@forchroubis.com

espa
Home Chemical Products for Construction PU Foams, Stairs Glue Step Adhesive Step Adhesive

Step Adhesive

Κωδικός προϊόντος: 68008121 Κατηγορίες: , ,

Περιγραφή

  • 2-component polyurethane expansion adhesive for fast and safe step mounting
  • It is also suitable for the adhesion of door and window sills
  • Acts sound-absorbing and can be loaded after only approx. 20 minutes
  • Safety adhesion of various materials, fills intermediate spaces with a fine-porous foam structure 
  • With one cartridge up to 2 step fixations are possible

Applications:

  • Adhesion without visible connection on wood, stone, metal, plaster and gas concrete, linoleum and PVC

Processing instructions:

  • The contact surfaces must be clean, dry, free of dust and grease as well as free of loosen parts. Prime plaster and gas concrete using the Primer. In case of steps which are coated with PVC or linoleum, remove waxes and oils – and grind the cleaned surface. Painted steps must be ground to get a solid compound the surface.
  • Adjust the steps, window and door sills to the spacer. The spacer enables an expansion-seam of approx. 5-15 mm.
  • Cut off both tops of the cartridge using a knife and put on the mixing nozzle. For narrow or deep seams use the small extension tube.
  • Insert into customary dual-cylinder-gun and apply the adhesive 
  • The application of the adhesive is possible in two different ways:
    – remove the pre-adjusted structure component. Apply lengthwise or crossways as stripes and make sure to have a distance between the stripes from approx. 8 cm. Immediately re-put the workpiece onto the spacer
    – bring the adhesive in the expansion seam between workpiece and underground. Make sure to keep the distance of approx. 8 cm between the adhesive stripes.
  • Structure components such as steps, window and door sills should be loaded with 2 weights each 12 kg per spacer (approx. 80 kg/m²)

Basis: 2K-polyurethane
Filling quantity: 250 g
Foam yield: approx. 3.3 l free-foaming
Start time: approx. 2 mins.
Hardening time: after approx 3.5 mins.
Can be cut: after 8 – 10 mins.
Loadable: after 20 mins.
Processing temperature: from +10°C to +30°C
Colour: yellowish
Shelf life: approx. 9 months

68008121

K02_160_1

X